The ETS Intercooler Kit for Evo has the following Features:
Pressure Checked at 35psi
Bolt on design retains crash beam (3in and 3.5in)
Fills entire grill with core
Eliminates excessive piping
Full Mandrel Bent 2.5in Piping
Stainless Steel T-Bolt Clamps
3-Ply Reinforced Silicone Couplers
Short Route: Two feet shorter than stock
Lower piping flows over 20% more than stock
Upper Piping flows over 12% more than stock
24x11.5x3.0in Bar & Plate Core, 1058cfm-700hp at 79% efficiency (Direct Replacement - Requires Minor Trimming on EVO 8 - See Pictures)
24x11.5x3.5in Bar & Plate Core, 1127cfm-750hp at 80% efficiency (Direct Replacement - Requires Minor Trimming on EVO 8 - See Pictures)
24x11.5x4.0in Bar & Plate Core, 1219cfm-820hp at 81% efficiency (Direct Replacement, - May require trimming of crash beam)
Recirculation kit is only needed for Short Route UICP (Stock route UICP uses stock recirculation pipe)
The ETS Lancer EVO Intercooler is the best on the market, bar none. It features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3in and 3.5in). The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps.
The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our piping starts off by immediately expanding into 2.5in diameter right off of the turbo elbow. This replaces the tiny 1 3/4in factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up and transient response. With an 11% increase in cross sectional area, flow is increased as well.
Also available for those with a Front Power Brace from Cusco. We make a bolt on intercooler that fits within the brace.
Note: Stock Route Piping Does Not Clear Air Box.
This part comes from ETS USA. We suggest you read any and all documentation and technical specifications related to this part that can be found on their web site located here. Images are used for reference only as product details / colors may change. If you are unsure, please ask before ordering. Please click on an application below to see the shipping costs for each item.